1. PocketWizard
Plus II is the world's first 'autosensing' transceiver. It is the
key to Jack Reznicki's wireless studio.
 |
 |
|
| 2. If you own a PocketWizard
Plus Transmitter and Receiver, you can do remote camera triggering by simply getting
one PocketWizard Plus II Transceiver. Or, you may use three Plus II Transceivers. |
 |
|
3. Place a PocketWizard
Plus II in the camera's hotshoe.
Plug in the optional accessory motordrive
cable to connect the camera port to the motordrive release terminal. |  |
|
4. Set the PocketWizard
in your hand, and on the camera to Channel 1. |  |
|
| 5. Set the PocketWizard
on the flash to Channel 2 |  |
|
6. Press the TEST button
on the PocketWizard in your hand to take the picture.
The Plus II on
the camera receives the signal and fires the shutter.
Then transmits
on channel 2 to fire the flash. |  |
|
Alternate settings:
If you set the transmitter in your hand and the Plus II on your camera to
Channel 2, set the flash to Channel 3.
If the hand control and Plus
II are on Channel 3, then the flash is on Channel 4.
If the hand control
and Plus II are on Channel 4, the transmit signal rolls over to Channel 1 so set
the PocketWizard on the flash to Channel 1. |
All information and offers contained herewith apply to the
USA only.
© 2008 PocketWizard
