The PocketWizard engineers created two RESET levels for the MiniTT1 and FlexTT5 radios: 

RESET A, a Simple Reset, allows you to reset learned Channels to the Channels last set in the Utility (C.1 and C.2 configurations).  This reset option will retain all features set via the Utility. 

RESET B, a Factory Default Reset, will reset all features and Channels to the Factory Default Settings.  See chart below for Factory Default Settings.

RESET A: Simple Reset

RESET A returns your MiniTT1 and FlexTT5 to the C.1 and C.2 configurations you created in the PocketWizard Utility.  All other settings will remain unchanged.

To reset the MiniTT1 or FlexTT5 follow these steps:

Step One
While pressing and holding the TEST button, slide the power switch from OFF to C.1.  Keep holding TEST!

658503Reset_image_2.jpeg

Step Two
Continue to press the TEST button and watch the Status LED. You will see 1 green blink, a brief pause and then 2 green blinks.

658503Reset_Image_4.jpeg

Release the TEST button. The last Channel settings you made with the PocketWizard Utility software are restored.  All other settings will be retained.

If you have never made settings with the Utility, Reset A will restore the channels in your radio back to factory defaults.

RESET B: Factory Default Reset
RESET B: will reset your radios to the Factory Default Settings.

Step One
While pressing and holding the TEST button, slide the power switch from OFF to C.1.  Keep holding TEST!


Step Two
Continue to press the TEST button for approximately 10 seconds and watch the Status LED.  You will see 1 green blink, a brief pause and then 2 green blinks, a long pause with no blinks, then 4 green blinks.  When you see the 4 green blinks, your radio has been reset to factory defaults.  Release the TEST button.

658503Reset_Image_4.jpeg



Factory Default Settings

Channels:
C.1 = Transmit: ControlTL Channel 1, Standard Channel 1
         Receive: ControlTL Channel 1 (FlexTT5 only)               
C.2 = ControlTL Channel 2, Standard Channel 2
         Receive: ControlTL Channel 2 (FlexTT5 only)
Use ControlTL for Receive Channel = enabled (FlexTT5 only)

For more details and a list of all factory default settings, please see the PocketWizard Wiki Factory Reset page.