CM-N3

CM-N3

Standard Remote Cable

For remotely triggering Canon cameras equipped with an N3 remote shutter release terminal.

Cable length: 3' (91.5 cm)

From: 1/8" (3.5 mm) mono miniphone
To: Canon N3 remote terminal

International Catalog Number: CM-N3
US Catalog Number:
804-501


Note: All CM-N3-ACC cables shipped into the market starting July/August 2013 include an MSMM Adapter (stereo to mono miniphone) which converts a CM-N3-ACC cable to a standard CM-N3 miniphone cable.  This change coincides with the introduction of our new retail packaging. All cables are now packaged in a eco-friendly 100% recycled paperboard box with white labels showing both ends of the cable as well as a compatibility list. This replaces our old packaging of a zipped plastic bag. 


PocketWizard Compatibility
:

  • Plus II
  • MultiMAX with no ACC port
  • For PlusX, Plus III, MultiMAX with -ACC port, or FlexTT5 radios, use a CM-N3-ACC cable.

Description:  This cable connects your PocketWizard radio to your camera’s remote shutter release terminal to enable remote camera triggering. 

This standard cable works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only.

A –P cable works with most PocketWizard radios.  This pre-trigger cable has a switch that allows you to toggle half-press on or off at the remote camera's position, but not from the transmitting radio.  (Using a CM-N3-ACC with a PTMM Adapter will provide the same functions as a CM-N3-P cable.)

An –ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions, as well as relay TTL signals to compatible speedlights when using FlexTT5s.  (Using a CM-N3-ACC with an MSMM Adapter will provide the same functions as a CM-N3 cable.)

 

Compatible with the following radios:

PlusX or Plus II:  Use this cable to remotely fire your camera.

Plus III:  This cable can remotely fire your camera but it has no half-press control.  Use a CM-N3–ACC cable for half-press control and for

MultiMAX with no –ACC port:  Use this cable to remotely fire your camera.

MultiMAX with –ACC port: This cable can remotely fire your camera but it has no half-press control.  Use a CM-N3-ACC cable for half-press functionality and for best results.

FlexTT5: This cable can be used to remotely fire your camera, like a –P cable or standard cable with a FlexTT5, but your remote camera will not be able to relay a TTL signal to speedlights.  Use a CM-N3-ACC cable for best results.  Learn more here.

Please see our PocketWizard Wiki for more details.

 

Compatible with cameras using Canon's N3 remote shutter release terminal including: 


Canon
Canon 
Canon 
Kodak
EOS-1D EOS-1V
EOS 20D
DCS 560
EOS-1D Mark II EOS-IV-HS
EOS 30D
DCS 520 
EOS-1D Mark IIN EOS-3
EOS 40D
 
EOS-1D Mark III EOS 5D
EOS 50D
 
EOS-1D Mark IV
EOS 5D Mark II EOS D30  
EOS-1Ds EOS 5D Mark III EOS D60  
EOS-1Ds Mark II EOS 6D EOS D2000  
EOS-1Ds Mark III EOS 7D    
EOS-1D X      

* Not for use with Kodak DCS Pro SLR/c.

Trademarks are the property of their respective owners.

product CM-N3 image
product thumb image 1
product thumb image 2

CM-N3

Standard Remote Cable

For remotely triggering Canon cameras equipped with an N3 remote shutter release terminal.

Cable length: 3' (91.5 cm)

From: 1/8" (3.5 mm) mono miniphone
To: Canon N3 remote terminal

International Catalog Number: CM-N3
US Catalog Number:
804-501


Note: All CM-N3-ACC cables shipped into the market starting July/August 2013 include an MSMM Adapter (stereo to mono miniphone) which converts a CM-N3-ACC cable to a standard CM-N3 miniphone cable.  This change coincides with the introduction of our new retail packaging. All cables are now packaged in a eco-friendly 100% recycled paperboard box with white labels showing both ends of the cable as well as a compatibility list. This replaces our old packaging of a zipped plastic bag. 


PocketWizard Compatibility
:

  • Plus II
  • MultiMAX with no ACC port
  • For PlusX, Plus III, MultiMAX with -ACC port, or FlexTT5 radios, use a CM-N3-ACC cable.

Description:  This cable connects your PocketWizard radio to your camera’s remote shutter release terminal to enable remote camera triggering. 

This standard cable works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only.

A –P cable works with most PocketWizard radios.  This pre-trigger cable has a switch that allows you to toggle half-press on or off at the remote camera's position, but not from the transmitting radio.  (Using a CM-N3-ACC with a PTMM Adapter will provide the same functions as a CM-N3-P cable.)

An –ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions, as well as relay TTL signals to compatible speedlights when using FlexTT5s.  (Using a CM-N3-ACC with an MSMM Adapter will provide the same functions as a CM-N3 cable.)

 

Compatible with the following radios:

PlusX or Plus II:  Use this cable to remotely fire your camera.

Plus III:  This cable can remotely fire your camera but it has no half-press control.  Use a CM-N3–ACC cable for half-press control and for

MultiMAX with no –ACC port:  Use this cable to remotely fire your camera.

MultiMAX with –ACC port: This cable can remotely fire your camera but it has no half-press control.  Use a CM-N3-ACC cable for half-press functionality and for best results.

FlexTT5: This cable can be used to remotely fire your camera, like a –P cable or standard cable with a FlexTT5, but your remote camera will not be able to relay a TTL signal to speedlights.  Use a CM-N3-ACC cable for best results.  Learn more here.

Please see our PocketWizard Wiki for more details.

 

Compatible with cameras using Canon's N3 remote shutter release terminal including: 


Canon
Canon 
Canon 
Kodak
EOS-1D EOS-1V
EOS 20D
DCS 560
EOS-1D Mark II EOS-IV-HS
EOS 30D
DCS 520 
EOS-1D Mark IIN EOS-3
EOS 40D
 
EOS-1D Mark III EOS 5D
EOS 50D
 
EOS-1D Mark IV
EOS 5D Mark II EOS D30  
EOS-1Ds EOS 5D Mark III EOS D60  
EOS-1Ds Mark II EOS 6D EOS D2000  
EOS-1Ds Mark III EOS 7D    
EOS-1D X      

* Not for use with Kodak DCS Pro SLR/c.

Trademarks are the property of their respective owners.