N-MCDC2
Standard Remote Cable
For connecting a Plus II or MultiMAX with no ACC port to a Nikon MC-DC2 remote shutter release terminal
From 1/8"
(3.5 mm) Mono Miniphone
To Nikon MC-DC2 remote shutter release terminal
International Catalog Number: N-MCDC2
US Catalog Number: 804-521
PocketWizard Compatibility:
· Plus II
· MultiMAX with no ACC port
· Use the N-MCDC2-ACC for PlusX, Plus III, MultiMAX with ACC port, or FlexTT5 radios.
Description: This cable connects your radio to your camera’s remote terminal to enable remote camera triggering. This standard cable works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only.
A –P cable works with most PocketWizard radios. This pre-trigger cable has a switch that allows you to toggle half-press on or off at the camera position, but not remotely.
A –ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions, as well as relay E-TTL signals to compatible flashes when using FlexTT5s.
Compatible with the following radios:
Plus II: Use this cable to remotely fire your camera.
Plus III: This cable can remotely fire your camera but it has no half-press control. Use a –ACC cable for best results.
FlexTT5: This cable can be used to remotely fire your camera, like a –P cable or standard cable with a FlexTT5, but your remote camera will not be able to relay an E-TTL signal to Speedlites. Use a –ACC cable for best results. Learn more here
MultiMAX with no –ACC port: Use this cable to remotely fire your camera.
MultiMAX with –ACC port: This cable can remotely fire your camera but it has no half-press control. Use a –ACC cable for best results
Please see our PocketWizard Wiki for more details
Compatible with cameras using Nikons MC-DC2 remote terminal including:
|
Nikon |
|
|
D90 |
|
| D600 | |
| D3100 | |
| D3200 | |
| D5000 | |
| D5100 | |
| D5200 |
|
| D7000 | |
Not for Nikon D70s or D80-use NM4 instead.
Trademarks are the property of their respective owners.
Standard Remote Cable
For connecting a Plus II or MultiMAX with no ACC port to a Nikon MC-DC2 remote shutter release terminal
From 1/8"
(3.5 mm) Mono Miniphone
To Nikon MC-DC2 remote shutter release terminal
International Catalog Number: N-MCDC2
US Catalog Number: 804-521
PocketWizard Compatibility:
· Plus II
· MultiMAX with no ACC port
· Use the N-MCDC2-ACC for PlusX, Plus III, MultiMAX with ACC port, or FlexTT5 radios.
Description: This cable connects your radio to your camera’s remote terminal to enable remote camera triggering. This standard cable works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only.
A –P cable works with most PocketWizard radios. This pre-trigger cable has a switch that allows you to toggle half-press on or off at the camera position, but not remotely.
A –ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions, as well as relay E-TTL signals to compatible flashes when using FlexTT5s.
Compatible with the following radios:
Plus II: Use this cable to remotely fire your camera.
Plus III: This cable can remotely fire your camera but it has no half-press control. Use a –ACC cable for best results.
FlexTT5: This cable can be used to remotely fire your camera, like a –P cable or standard cable with a FlexTT5, but your remote camera will not be able to relay an E-TTL signal to Speedlites. Use a –ACC cable for best results. Learn more here
MultiMAX with no –ACC port: Use this cable to remotely fire your camera.
MultiMAX with –ACC port: This cable can remotely fire your camera but it has no half-press control. Use a –ACC cable for best results
Please see our PocketWizard Wiki for more details
Compatible with cameras using Nikons MC-DC2 remote terminal including:
|
Nikon |
|
|
D90 |
|
| D600 | |
| D3100 | |
| D3200 | |
| D5000 | |
| D5100 | |
| D5200 |
|
| D7000 | |
Not for Nikon D70s or D80-use NM4 instead.
Trademarks are the property of their respective owners.