N90M3

N90M3

Standard Remote Cable

For connecting a Plus II or MultiMAX with no ACC port to a Nikon 10-pin remote terminal.

Cable length: 3' (91.5 cm)

From: 1/8" (3.5 mm) mono miniphone
To:
Nikon 10-pin remote shutter release terminal

International Catalog Number: N90M3
US Catalog Number:
804-503

PocketWizard Compatibility:         

Plus II
MultiMAX with no ACC port

Use the N10-ACC-D200 (formally the N90M-ACC) for PlusX, Plus III, MultiMAX with ACC port, or FlexTT5 radios.

Description:  This cable connects your radio to your camera’s remote shutter release terminal to enable remote camera triggering.  This standard cable works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only.

A N90M3–P (PreTrigger) cable works with most PocketWizard radios.  This pre-trigger cable has a switch that allows you to toggle half-press on or off at the camera position, but not remotely.

A N10-ACC or N10-ACC-200 cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions, as well as relay E-TTL signals to compatible flashes when using FlexTT5s.

 

Compatible with the following radios:

Plus II:  Use this cable to remotely fire your camera.

Plus III:  This cable can remotely fire your camera but it has no half-press control.  Use a N10–ACC or N10-ACC-D200 cable for best results.

FlexTT5: This cable can be used to remotely fire your camera, like a N90M3–P cable with a FlexTT5, but your remote camera will not be able to relay an E-TTL signal to Speedlites.  Use a N10–ACC or N10-ACC-D200 cable for best results.  Learn more here.

MultiMAX with no –ACC port:  Use this cable to remotely fire your camera.

MultiMAX with –ACC port: This cable can remotely fire your camera but it has no half-press control.  Use a N10–ACC or N10-ACC-D200 cable for best results.

Please see our PocketWizard Wiki for more details

Compatible with cameras using Nikon's 10-pin remote shutter release terminal including:

Nikon

Nikon

Kodak

Fuji

N90
D3 DCS Pro SLR/n
S3 Pro
N90s    D3s  DCS Pro 14n
S3 Pro UV IS 
F5
D3X  DCS 760
S5 Pro
F6
D4   DCS 720x IS Pro
F100
D4s
DCS 660
 
D1
D100 w/ MB-D100 DCS 660M
 
D1H
D200
DCS 620
 
D1X
D300 DCS 620x
 
D2H
D300s    
D2s         D700    
D2X
D800/D800E    
D2Xs D810    

 

Trademarks are the property of their respective owners.

product N90M3 image
product thumb image 1
product thumb image 2

N90M3

Standard Remote Cable

For connecting a Plus II or MultiMAX with no ACC port to a Nikon 10-pin remote terminal.

Cable length: 3' (91.5 cm)

From: 1/8" (3.5 mm) mono miniphone
To:
Nikon 10-pin remote shutter release terminal

International Catalog Number: N90M3
US Catalog Number:
804-503

PocketWizard Compatibility:         

Plus II
MultiMAX with no ACC port

Use the N10-ACC-D200 (formally the N90M-ACC) for PlusX, Plus III, MultiMAX with ACC port, or FlexTT5 radios.

Description:  This cable connects your radio to your camera’s remote shutter release terminal to enable remote camera triggering.  This standard cable works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only.

A N90M3–P (PreTrigger) cable works with most PocketWizard radios.  This pre-trigger cable has a switch that allows you to toggle half-press on or off at the camera position, but not remotely.

A N10-ACC or N10-ACC-200 cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions, as well as relay E-TTL signals to compatible flashes when using FlexTT5s.

 

Compatible with the following radios:

Plus II:  Use this cable to remotely fire your camera.

Plus III:  This cable can remotely fire your camera but it has no half-press control.  Use a N10–ACC or N10-ACC-D200 cable for best results.

FlexTT5: This cable can be used to remotely fire your camera, like a N90M3–P cable with a FlexTT5, but your remote camera will not be able to relay an E-TTL signal to Speedlites.  Use a N10–ACC or N10-ACC-D200 cable for best results.  Learn more here.

MultiMAX with no –ACC port:  Use this cable to remotely fire your camera.

MultiMAX with –ACC port: This cable can remotely fire your camera but it has no half-press control.  Use a N10–ACC or N10-ACC-D200 cable for best results.

Please see our PocketWizard Wiki for more details

Compatible with cameras using Nikon's 10-pin remote shutter release terminal including:

Nikon

Nikon

Kodak

Fuji

N90
D3 DCS Pro SLR/n
S3 Pro
N90s    D3s  DCS Pro 14n
S3 Pro UV IS 
F5
D3X  DCS 760
S5 Pro
F6
D4   DCS 720x IS Pro
F100
D4s
DCS 660
 
D1
D100 w/ MB-D100 DCS 660M
 
D1H
D200
DCS 620
 
D1X
D300 DCS 620x
 
D2H
D300s    
D2s         D700    
D2X
D800/D800E    
D2Xs D810    

 

Trademarks are the property of their respective owners.