NM4

Standard Remote Cable

For connecting a Plus II or MultiMAX with no ACC port to a Nikon MC-DC1 remote terminal

From 1/8" (3.5 mm) Mono Miniphone

To Nikon MC-DC1 Remote shutter release terminal

International Catalog Number: NM4

US Catalog Number: 804-520

PocketWizard Compatibility:         

·  Plus II

·  MultiMAX with no ACC port

·  Use the NM4-ACC for PlusX, Plus III, MultiMAX with ACC port, or FlexTT5 radios.

Description:  This cable connects your radio to your camera’s remote terminal to enable remote camera triggering.  This standard cable works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only.

A –P cable works with most PocketWizard radios.  This pre-trigger cable has a switch that allows you to toggle half-press on or off at the camera position, but not remotely.

A –ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions, as well as relay E-TTL signals to compatible flashes when using FlexTT5s.

 

Compatible with the following radios:

Plus II:  Use this cable to remotely fire your camera.

Plus III:  This cable can remotely fire your camera but it has no half-press control.  Use a –ACC cable for best results.

FlexTT5: This cable can be used to remotely fire your camera, like a –P cable or standard cable with a FlexTT5, but your remote camera will not be able to relay an E-TTL signal to Speedlites.  Use a –ACC cable for best results.  Learn more here

MultiMAX with no –ACC port:  Use this cable to remotely fire your camera.

MultiMAX with –ACC port: This cable can remotely fire your camera but it has no half-press control.  Use a –ACC cable for best results

Please see our PocketWizard Wiki for more details

Compatible with cameras using Nikon's MC-DC1 remote terminal including:

Nikon
D70S (not D70)
D80

For cameras with MC-DC2 remote terminal, use N-MCDC2.

Trademarks are the property of their respective owners.

product NM4 image
product thumb image 1
product thumb image 2

Standard Remote Cable

For connecting a Plus II or MultiMAX with no ACC port to a Nikon MC-DC1 remote terminal

From 1/8" (3.5 mm) Mono Miniphone

To Nikon MC-DC1 Remote shutter release terminal

International Catalog Number: NM4

US Catalog Number: 804-520

PocketWizard Compatibility:         

·  Plus II

·  MultiMAX with no ACC port

·  Use the NM4-ACC for PlusX, Plus III, MultiMAX with ACC port, or FlexTT5 radios.

Description:  This cable connects your radio to your camera’s remote terminal to enable remote camera triggering.  This standard cable works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only.

A –P cable works with most PocketWizard radios.  This pre-trigger cable has a switch that allows you to toggle half-press on or off at the camera position, but not remotely.

A –ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions, as well as relay E-TTL signals to compatible flashes when using FlexTT5s.

 

Compatible with the following radios:

Plus II:  Use this cable to remotely fire your camera.

Plus III:  This cable can remotely fire your camera but it has no half-press control.  Use a –ACC cable for best results.

FlexTT5: This cable can be used to remotely fire your camera, like a –P cable or standard cable with a FlexTT5, but your remote camera will not be able to relay an E-TTL signal to Speedlites.  Use a –ACC cable for best results.  Learn more here

MultiMAX with no –ACC port:  Use this cable to remotely fire your camera.

MultiMAX with –ACC port: This cable can remotely fire your camera but it has no half-press control.  Use a –ACC cable for best results

Please see our PocketWizard Wiki for more details

Compatible with cameras using Nikon's MC-DC1 remote terminal including:

Nikon
D70S (not D70)
D80

For cameras with MC-DC2 remote terminal, use N-MCDC2.

Trademarks are the property of their respective owners.