S-RMS1AM-ACC

S-RMS1AM-ACC
S-RMS1AM-ACC-1

Pre-Trigger Remote Cable

For connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Sony or Minolta remote shutter release terminal.

Cable lengths: 3' (91 cm) and 1' (30 cm)

From 1/8" (3.5 mm) stereo miniphone
To Sony or Minolta remote shutter release terminal

Note: NOT for Sony Multi Terminal Interface remote port

Int'l #: S-RMS1AM-ACC, S-RMS1AM-ACC-1
US #
: 802-458, 802-504

PocketWizard Compatibility:         

•  PlusX
•  Plus III
•  FlexTT5
•  MultiMAX with ACC port
•  Use the S-RMS1AM-P or S-RMS1AM for the Plus II, older MultiMAX, or other PocketWizard radios.

 

Description: This is a special remote shutter release cable called a Pre-Trigger Cable.  A Pre-Trigger cable controls both the half-press and full-press function of your remote camera’s shutter release.  When a camera is “pre-triggered”, it is like holding your camera’s shutter release button in the half-pressed or metering/focusing position.

This –ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions.

Added bonus: All S-RMS1AM-ACC cables shipped into the market starting July/August 2013 include a MSMM Adapter (stereo to mono miniphone) which converts a S-RMS1AM-ACC cable to a standard S-RMS1AM miniphone cable.  This change coincides with the introduction of our new retail packaging.  All cables are now packaged in a environmental friendly cardboard box with rececyled white labels showing both ends of the cable as well as compatibility list. This replaces our old packaging of a zipped bag packaging.

A Standard Cable (S-RMS1AM) works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only. (Using a S-RMS1AM-ACC cable with a MSMM Adapter will provide the same function as a S-RMS1AM cable.)

A Pre-Release or Pre-Trigger (-P) Cable (S-RMS1AM-P) works with most PocketWizard radios.  This pre-trigger cable has a switch that allows you to toggle half-press on or off at the camera position, but not remotely. (Using a S-RMS1AM cable with a PTMM Adapter will provide the same function as a S-RMS1AM-P cable.)


Compatible with the following radios:

PlusX: Use this cable with the PlusX to trigger the camera.  

Plus III:  Use this cable with the Plus III’s exclusive 2-stage trigger to wake-up or focus your remote camera just like using the camera’s shutter release button. 

FlexTT5:  This cable is required for relay mode with E-TTL, or other remote triggering with the FlexTT5.  Learn more here.  You can use a –P cable or standard cable with a FlexTT5, but your remote camera will not be able to relay an E-TTL signal to Speedlites.  The FlexTT5 does not support the 2-stage trigger function.

MultiMAX with –ACC port: Enable a remote zone with your hand-held MultiMAX, and your remote MultiMAX will wake up its remote camera with this cable.  As long as the zone is turned on, the remote camera will stay awake and respond more quickly and consistently, but also consume the camera's batteries much more quickly.  When the remote zone is disabled, the camera will enter its normal sleep modes.  The MultiMAX does not support the 2-stage trigger function.

Please see our PocketWizard Wiki for more details.

 

Compatible with Sony and Minolta Cameras:

Sony:
  Sony:   Minolta:
A100
  A650   RD-175
A200   A57   Alpha7 Digital
A300   A580    Alpha Sweet Digital
A33
  A65
  Maxxum/Dynax 5D
A35
  A65V
  Maxxum/Dynax 7D
A350
  A700
  Dimage A1
A450
  A77
  Dimage A2
A500   A77V   Dimage 5
A55   A850    Dimage 7
A55V   A900   Dimage 7i
A550
  A99
  Film Cameras w/ cable release port
         

 Note: NOT for Sony Multi Terminal Interface remote port

Trademarks are the property of their respective owners.

 

product S-RMS1AM-ACC image
product thumb image 1
product thumb image 2
product thumb image 3

S-RMS1AM-ACC
S-RMS1AM-ACC-1

Pre-Trigger Remote Cable

For connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Sony or Minolta remote shutter release terminal.

Cable lengths: 3' (91 cm) and 1' (30 cm)

From 1/8" (3.5 mm) stereo miniphone
To Sony or Minolta remote shutter release terminal

Note: NOT for Sony Multi Terminal Interface remote port

Int'l #: S-RMS1AM-ACC, S-RMS1AM-ACC-1
US #
: 802-458, 802-504

PocketWizard Compatibility:         

•  PlusX
•  Plus III
•  FlexTT5
•  MultiMAX with ACC port
•  Use the S-RMS1AM-P or S-RMS1AM for the Plus II, older MultiMAX, or other PocketWizard radios.

 

Description: This is a special remote shutter release cable called a Pre-Trigger Cable.  A Pre-Trigger cable controls both the half-press and full-press function of your remote camera’s shutter release.  When a camera is “pre-triggered”, it is like holding your camera’s shutter release button in the half-pressed or metering/focusing position.

This –ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions.

Added bonus: All S-RMS1AM-ACC cables shipped into the market starting July/August 2013 include a MSMM Adapter (stereo to mono miniphone) which converts a S-RMS1AM-ACC cable to a standard S-RMS1AM miniphone cable.  This change coincides with the introduction of our new retail packaging.  All cables are now packaged in a environmental friendly cardboard box with rececyled white labels showing both ends of the cable as well as compatibility list. This replaces our old packaging of a zipped bag packaging.

A Standard Cable (S-RMS1AM) works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only. (Using a S-RMS1AM-ACC cable with a MSMM Adapter will provide the same function as a S-RMS1AM cable.)

A Pre-Release or Pre-Trigger (-P) Cable (S-RMS1AM-P) works with most PocketWizard radios.  This pre-trigger cable has a switch that allows you to toggle half-press on or off at the camera position, but not remotely. (Using a S-RMS1AM cable with a PTMM Adapter will provide the same function as a S-RMS1AM-P cable.)


Compatible with the following radios:

PlusX: Use this cable with the PlusX to trigger the camera.  

Plus III:  Use this cable with the Plus III’s exclusive 2-stage trigger to wake-up or focus your remote camera just like using the camera’s shutter release button. 

FlexTT5:  This cable is required for relay mode with E-TTL, or other remote triggering with the FlexTT5.  Learn more here.  You can use a –P cable or standard cable with a FlexTT5, but your remote camera will not be able to relay an E-TTL signal to Speedlites.  The FlexTT5 does not support the 2-stage trigger function.

MultiMAX with –ACC port: Enable a remote zone with your hand-held MultiMAX, and your remote MultiMAX will wake up its remote camera with this cable.  As long as the zone is turned on, the remote camera will stay awake and respond more quickly and consistently, but also consume the camera's batteries much more quickly.  When the remote zone is disabled, the camera will enter its normal sleep modes.  The MultiMAX does not support the 2-stage trigger function.

Please see our PocketWizard Wiki for more details.

 

Compatible with Sony and Minolta Cameras:

Sony:
  Sony:   Minolta:
A100
  A650   RD-175
A200   A57   Alpha7 Digital
A300   A580    Alpha Sweet Digital
A33
  A65
  Maxxum/Dynax 5D
A35
  A65V
  Maxxum/Dynax 7D
A350
  A700
  Dimage A1
A450
  A77
  Dimage A2
A500   A77V   Dimage 5
A55   A850    Dimage 7
A55V   A900   Dimage 7i
A550
  A99
  Film Cameras w/ cable release port
         

 Note: NOT for Sony Multi Terminal Interface remote port

Trademarks are the property of their respective owners.