N90M3-P

Pre-Trigger Remote Cable
For connecting a Plus II or MultiMAX with no ACC port to a Nikon 10-pin remote shutter release terminal, through a Pre-Trigger switch

Cable length: 3' (91.5 cm)

From 1/8" (3.5 mm) Mono Miniphone

Via Pre-Trigger Switch

To Nikin 10-pin remote shutter release terminal

International Catalog Number: N90M3-P

US Catalog Number: 804-513

PocketWizard Compatibility:         

· Plus II

· MultiMAX with no ACC port

· Use the N90M-ACC for the PlusX, Plus III, MultiMAX with ACC port, or  FlexTT5 radios

Description:  This cable contains a pre-trigger switch.  When enabled, the camera behaves as if the camera's shutter release button were held half-pressed continuously. This makes the camera respond more quickly and consistently, but also consumes the camera's batteries much more quickly. When disabled, this cable functions identically to the N90M3.

This –P cable works with most PocketWizard radios. This pre-trigger cable has a switch that allows you to toggle half-press on or off at the camera position, but not remotely.

A standard cable works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only.

A –ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions, as well as relay E-TTL signals to compatible flashes when using FlexTT5s.

 

Compatible with the following radios:

Plus II: Use this cable to remotely fire your camera.

Plus III : This cable can remotely fire your camera and control half-press function at the camera’s position.  Use a –ACC cable for best results and to have half-press capability from the transmitting radio.

MultiMAX with no –ACC port:  Use this cable to remotely fire your camera and control half-press function at the camera’s position.

MultiMAX with –ACC port: This cable can remotely fire your camera but cannot wake up the camera in a remote zone.  Use a –ACC cable for best results

FlexTT5:  This cable can remotely fire your camera and control half-press function at the camera’s position, but your remote camera will not be able to relay an E-TTL signal to Speedlites.  Use a –ACC cable for best results.  Learn more here

Please see our PocketWizard Wiki for more details.

Compatible with cameras using Nikon's 10-pin remote terminal including:

Nikon		Kodak	Fuji
N90	D3	DCS Pro SLR/n	S3 Pro
N90S	D3s	DCS Pro 14n	S3 Pro UV IS
F5	D3X	DCS 760	S5 Pro
F6	D4	DCS 720x	IS Pro
F100	D100 w/ MB-D100	DCS 660
D1	D200	DCS 660M
D1H	D300	DCS 620
D1X	D300s	DCS 620x
D2H	D700
D2Hs	D800
D2X	D800E
D2Xs

Trademarks are the property of their respective owners.