Standard Remote CableFor connecting a Plus II or MultiMAX with no ACC port to a Nikon 10-pin remote terminalCable length: 3' (91.5 cm)
From 1/8" (3.5 mm) Mono Miniphone
To Nikon 10-pin remote shutter release terminal
International Catalog Number: N90M3
US Catalog Number: 804-503
· Plus II
· MultiMAX with no ACC port
· Use the N90M-ACC for PlusX, Plus III, MultiMAX with ACC port, or FlexTT5 radios.
Description: This cable connects your radio to your camera’s remote terminal to enable remote camera triggering. This standard cable works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only.
A –P cable works with most PocketWizard radios. This pre-trigger cable has a switch that allows you to toggle half-press on or off at the camera position, but not remotely.
A –ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions, as well as relay E-TTL signals to compatible flashes when using FlexTT5s.
Compatible with the following radios:
Plus II: Use this cable to remotely fire your camera.
Plus III: This cable can remotely fire your camera but it has no half-press control. Use a –ACC cable for best results.
FlexTT5: This cable can be used to remotely fire your camera, like a –P cable or standard cable with a FlexTT5, but your remote camera will not be able to relay an E-TTL signal to Speedlites. Use a –ACC cable for best results. Learn more here
MultiMAX with no –ACC port: Use this cable to remotely fire your camera.
MultiMAX with –ACC port: This cable can remotely fire your camera but it has no half-press control. Use a –ACC cable for best resultsPlease see our PocketWizard Wiki for more details
Compatible with cameras using Nikon's 10-pin remote terminal including:
||D3||DCS Pro SLR/n
||D3S||DCS Pro 14n
||S3 Pro UV IS
||D4||DCS 720x||IS Pro|
Trademarks are the property of their respective owners.