PowerMC2

The PowerMC2 Receiver Module enables remote power control of Einstein™ E640 flashes using PocketWizard ControlTL technology. With a MiniTT1 Transmitter or FlexTT5 Transceiver on your camera and a PowerMC2 plugged into your Einstein™ E640 flash, you can now adjust the flash power settings directly from the camera position.

Add the AC3 ZoneController and you can control three different zones of lights in 1/3-stop increments with up to a six-stop range. Utilize PocketWizard’s unique features such as HyperSync and Optimized Rear Curtain Sync for maximum control of your lighting.
product PWPOWERMC2 image
product thumb image 1
product thumb image 2

Frequency:

FCC/IC model: 340.00 - 354.00  North America
CE model: 433.42 - 434.42 MHz  EU/Asia/Other

Channels:

52 Channels over 26 Frequencies - US FCC/IC
35 Channels over 5 Frequencies - CE

Antenna:

2.7" (6.9 cm) rubberized

Mounting: 

Five-pin remote socket

Zone Select Switch:

A-B-C    Plus channel "D" if receiving on a MultiMAX channel.

Status Indicator:

LED: Green, Amber, Red Status indications

USB:

USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground

Operating temperature:

Above -15° C (5° F) and below 50° C (120° F)

Storage
temperature:  
(without battery)

Above -30° C (22° F) and below 85° C (185° F)

Construction:

High impact plastic, rubberized antenna

Power:

Receives power from attached flash

Dimensions:

4.66" (11.84 cm) long x 1.29" (3.27 cm) wide x .43" (1.09 cm) depth

Weight:

.77 ounces (21.83 grams)

Included in the box:

PowerMC2 Receiver, Quick Guide

RoHS Compliant

 

Requirements:

Must be used in conjunction with a MiniTT1 or FlexTT5 on camera for power control capability.  May be paired with any PocketWizard transmitter or transceiver for simple triggering.