MiniTT1-Nikon
With its low profile design, you can use the MiniTT1 Transmitter on camera to trigger remote i-TTL / CLS speedlights or studio flashes attached to FlexTT5 Transceivers.Place TTL or manual flashes anywhere to illuminate the scene: Around corners, out-of-sight and in bright sunlight. The MiniTT1 is compatible with any PocketWizard radio for triggering manual flash or remote cameras.
|
TTL Compatibility |
Nikon CLS / i-TTL |
|
FC/ICC model: 340.00 - 354.00 MHz North America CE model: 433.42 - 434.42 MHz EU/Asia/Other |
|
|
Channels: |
52 Channels over 26 Frequencies (FCC/IC) |
|
Antenna: |
Internal |
|
Transmit output power: |
Less than 0.001 watt (1/1000 of a watt or 1 milliwatt) |
|
Range Performance: |
Up to 800 feet (10 to 240 meters) for CLS / i-TTL triggering depending on flash used, antenna orientation and other variables. Up to 1200 feet (10 to 365 meters) for basic triggering depending on flash used, antenna orientation and other variables.
|
|
Mounting: |
Hot shoe only |
|
Maximum Shooting Rate*: |
TTL Mode: within approximately 1 FPS of camera's maximum FPS
|
|
Power / Channel Switch: |
OFF - C.2 - C.1 |
|
Status Indicator: |
LED, Green, Amber, Red status indications |
|
Voltage Present: |
3.3 VDC (all pins) - safe for all cameras |
|
Hot Shoe voltage protection |
Hot Shoe: up to 50V |
|
USB: |
USB Compliant 2.0, Mini-B Connector |
|
Operating Temperature: |
above -15C (5 F) and below 50 C (120 F) |
|
Storage Temperature: |
above -30 C (-22 F) and below 85 C (185 F) |
|
Construction: |
High impact plastic, captive battery door |
|
Power: |
3 V Lithium battery, CR2450 (included) or CR2354 Lithium coin cell type |
|
Battery Life: |
30 - 50 hours of camera "awake time" depending on shooting habits |
|
Dimensions: |
2.8" (7.1 cm) long x 1.9" (4.9 cm) wide x 1.3" (3.3 cm) tall |
|
Weight: |
2.3 oz (65 grams), 2.0 oz (57 grams) without battery |
|
Included in the box: |
MiniTT1 Transmitter, USB cable, CR2450 battery, Quick Guide |
|
ROHS Compliant |