MiniTT1-Canon-CE
The New Shape of Wireless Freedom
The smallest PocketWizard radio ever, the MiniTT1™ Transmitter locks
onto the camera’s hot shoe supporting an on-camera flash with its own
hot shoe while working with remote PocketWizard units. Remotes can be
one or more PocketWizard FlexTT5™ Transceivers connected to Canon E-TTL
II flashes or any PocketWizard Receiver for triggering flash or remote
cameras.
The MiniTT1 Transmitter is easy to use; just slide in place and begin
to shoot. The new PocketWizard ControlTL™ System interprets the
complex E-TTL II data being sent through the camera’s hot shoe and
digitally transmits it in a reliable radio signal. Change the flash
compensation dial on the camera, and those commands pass seamlessly
through the system to your remote flash. Adjust your shutter speed,
aperture or ISO and the system corrects for those changes. A ratio
command set on the flash or command unit passes through the MiniTT1 to
set the remotes. PocketWizard ControlTL radio communication allows you
to shoot farther, faster, around corners, through walls even at high
noon in bright daylight. Now you can deploy a wireless flash system
wherever you want, without infrared limitations, in seconds.
Use the MiniTT1 for standard triggering with any PocketWizard Receiver
including the FlexTT5, PlusII or MultiMAX. When used this way with a
digital camera, you can take advantage of PocketWizard’s HyperSync
Technology that allows up to 1/500th of a second camera sync with many
camera/strobe set-ups. HyperSync allows you to advance the timing of
your flash trigger so that faster than X-sync speeds can be achieved.
Need more speed? Push your ControlTL system beyond 1/500th and go into
FP/High-Speed Sync mode automatically. No buttons to press or settings
to change other than your shutter speed will give you flash sync all
the way to 1/8000th.
A new PocketWizard Utility download is provided to support the
MiniTT1 via a USB port. The Utility allows you to configure your
channel settings, dial in your HyperSync timing, adjust your sleep-mode
timers and update your product to the latest firmware.
The PocketWizard MiniTT1 Transmitter is the start of a new era in wireless trigger control.
MiniTT1 Transmitter TECHNOLOGY: Click on any of the Technology icons below to learn more.
MiniTT1 Transmitter UPDATES:
Click here to download the PocketWizard Utility
Click here for details on range extending solutions of the 430 EX, 580EX & 580EX II Canon flashes
The Canon 430EXII is recommended for those needing extended range performance.
AVAILABILITY: Canon CE product currently available in the following countries:
| Australia |
Hong Kong |
Poland |
| Belgium | Hungary |
Russia |
| Bulgaria | Israel |
Spain |
| Denmark |
Netherlands | Sweden |
| France |
New Zealand | Switzerland |
| Germany | Norway | |
| Greece | Phillipines |
Contact your local Distributor or Dealer for
availability. Click here to find a PocketWizard Dealer near you.
For a Nikon ControlTL System availability update, click here.
NOTE:
* PocketWizard radio systems utilize different frequencies in different
markets to meet performance and regulatory requirements. We
can not provide proper warranty service for products shipped out of
their intended market.
Click here for more information regarding PocketWizard frequency.
INSTRUCTION (OWNER'S) MANUAL: Click on the link below to
download the CE 433MHz MiniTT1/FlexTT5 Owner's Manual plus Addendums. We
have added five Addendums to the Manual since we launched the 433MHz CE MiniTT1
and FLexTT5. When you open the downloaded PDF, you will see the
latest 5.000 Addendum followed by the CE Addendum and then Addendum
4.300, Addendum 4.250 and finally Addendum 4.100. The last section of the PDF contains the original Owner's
Manual. We are in the process of integrating all the Addendums into
one Manual so please check back for a complete Owner's Manual.
